Skip to main content

Changing an invoice

What this is for

A draft invoice can be changed until you complete it. Most changes are safe. Three are not — they destroy packing and pallet work permanently, and the software does not always warn you.

This page marks each of the three at the point where you make it. Read the warning before you act, not afterwards.

Before you start

The invoice must still be In Progress. A completed invoice cannot be changed at all — see the last section.

Changing an invoice

  1. Open Invoice in the top menu.
  2. Select the Edit (pencil) icon on the invoice's row. The icon appears only on In Progress rows.
  3. Change what you need.
  4. Select Update.

You return to the list and see "Invoice has been updated successfully!".

What can never be changed

Four boxes are switched off on the edit screen and cannot be changed for the life of the invoice:

  • Company
  • Customer
  • Currency
  • Dispatch Details

Dispatch Details is the one people try. The box sits on the screen, filled in, looking editable. It is not, and no message explains why. The delivery location is fixed when the invoice is created, because the purchase orders were matched against it.

To send goods to a different location, delete this invoice and raise a new one.

Changing a dispatch quantity

This destroys packing work. Nothing on the screen warns you.

Changing a line's Dispatch Qty on an invoice that already has packing removes work you cannot get back. It happens on any change to the figure — larger or smaller — not only when you reduce it.

Here is what a reader sees afterwards, for one changed line:

  • Every packing row for that line disappears except one. The one that survives is the row holding the largest quantity, which is not necessarily the first row on the packing screen.
  • The pallet placements of those removed rows go with them. The cartons are no longer on any pallet.
  • The surviving row's gross weight returns to zero if it now holds more than the new quantity.
  • If the surviving row was in a carton group, the group is broken up. The row goes back to the carton it used before it joined the group, and its gross weight returns to zero whatever the quantity.
  • If the total packed still exceeds the new quantity, further rows are removed, newest first, until it fits. A row that is only partly over is kept and recalculated.
  • Pallets left holding nothing are removed, and a manifest left with no pallets is removed too.

None of this can be undone. Re-pack the line and type the weights in again.

IMAGE PLACEHOLDER — changing-an-invoice-dispatch-qty-01 · before-and-after diagram · status: pending

Shows: what a single dispatch-quantity change removes from packing and pallets

Must include: a "before" column with one invoice line packed across three carton rows, two of them on a pallet and one of them inside a carton group; an "after" column showing only the largest row surviving, its gross weight back at zero, the carton group broken up, and the removed rows' pallet placements gone; a caption stating this happens on any change to the figure, up or down

Must not show: any real customer, invoice number, product or company data

Alt text (draft): Changing a line's dispatch quantity removes every packing row for that line except the one holding the largest quantity, together with the pallet placements of the removed rows. The surviving row loses its gross weight if it now holds too much, and is taken out of any carton group it was in.

Removing a line

This destroys packing and pallet work for that line. It cannot be recovered.

Taking a line off the invoice removes, permanently:

  • Every packing row belonging to that line.
  • Every pallet placement of those rows.
  • The line itself.

None of it is kept in a removed state anywhere. It is gone from the system, and no screen or export will show it again. Carton groups left holding nothing are tidied away, pallets left empty are removed, and a manifest left with no pallets is removed too.

The purchase order behind the line is put back in step: its outstanding quantity is recalculated and its status reworked, so the goods become available to invoice again.

Turning Allow Pallet from Yes to No

This destroys every pallet for the invoice, permanently. Switching it back to Yes brings nothing back.

Setting Allow Pallet to No and saving removes every pallet, every carton placement on those pallets, and every pallet measurement for this invoice — including ones already removed earlier. The invoice's pallet quantity is set to zero.

There is no way back. The manifest must be built again from the start.

A confirmation appears first — but only sometimes. Trade Ledger asks only when the invoice already has at least one pallet. The window is headed "Are you sure?" and reads:

"Disabling pallets will permanently delete all created pallet records associated with this invoice upon submitting. This action cannot be undone."

The buttons are Yes, delete and Cancel. Choosing Cancel puts the answer back to Yes.

Two things about that confirmation are worth knowing. It appears when you change the answer, not when you save — the deletion happens later, when you select Update. And if the invoice has no pallets yet, no confirmation appears at all, because there is nothing to lose.

Changing the Rate on a line that is already there

The rate you type is not kept. Everything worked out from it is kept. The line's amount, the invoice totals and the tax all follow the new rate, while the Rate column keeps the old one.

Type a new rate and the screen behaves as you expect. The Amount on the line, the invoice totals and the tax all move. Save, then reopen the invoice. The Rate box holds the value it had before. The Amount box holds the figure worked out from the rate you typed.

The two no longer agree. Quantity times the rate shown does not give the amount shown.

This reaches your customer. Four documents print a rate beside an amount: "Invoice", "Invoice To The Order", "Tax Invoice" and "Tax Invoice To The Order". Each prints the stored rate next to an amount worked out from a different one. A buyer, a bank or a customs officer sees a line that does not multiply out.

A rate typed on a line that is new to the invoice is kept. What decides it is the age of the line, not the value.

Set the rate before the first save. On a line brought in from a purchase order and saved for the first time, whatever you type is stored.

To replace a rate that is already stored, remove the line and add it again from the purchase order. Enter the correct rate before you save.

Removing a line destroys the packing and pallet work for that line, permanently. That repair is therefore safe only before packing starts. Once a line is packed, correcting its rate costs the packing rows, their weights and their pallet placements. See Removing a line above.

If the line is already packed and its rate is wrong, neither choice is free. Tell your administrator before you decide.

See Things that do not work as expected for the same behaviour described from the symptom, under "I changed a Rate on an invoice and the total updated, but the rate went back".

Changes that are safe

Everything else on the edit screen can be changed without losing work:

  • Invoice Date, within the same window as when creating.
  • Exchange Rate, and Additional Charges, and the Rate on any line..
  • Port of Loading, Port of Discharge and Transport Mode, where the invoice is an export. On a domestic invoice all three stay switched off.
  • Declaration and Terms of Delivery & Payment.
  • HSN Code on a line.
  • Adding a line from another purchase order, as long as it passes the same currency and dispatch-location checks as when creating.

Changing a rate reworks that line's amount, the invoice totals, and the tax.

Once the invoice is completed

A completed invoice cannot be changed. The Edit icon disappears from its row, and reaching the edit screen another way is refused with:

"Invoice cannot be edited as it is not in progress state."

A completed invoice cannot be deleted either: "Invoice cannot be deleted as it is already complete."

There is no way to reopen a completed invoice. See Completing an invoice.

Errors you may see

What happened What you see
You opened the edit screen for a completed invoice "Invoice cannot be edited as it is not in progress state."
You tried to delete a completed invoice "Invoice cannot be deleted as it is already complete."
A dispatch quantity above what is outstanding "Exceeds available qty (12.000)." (your figure will differ)
An added order in a different currency "The following Purchase Order(s) have a different currency than the invoice currency: " then the order numbers
An added order with a different dispatch location "The following selected Purchase Order(s) do not match the selected invoice dispatch details: " then the order numbers
A date outside the window "Date must be after or equal to 01-04-2026." / "Date must be before or equal to 31-07-2026." (your dates will differ)
A rate of 0 or less "Rate must be greater than 0."
Something else went wrong "Something went wrong. Please try again later."

The full list of every message is on Error messages.

What happens behind the scenes

  • The company's and customer's details are never refreshed. They were copied when the invoice was created. Correcting the customer's address today does not change this invoice, however many times you save it.
  • The packing sweep runs on every save, for every line, not only the lines you touched. It compares each line's dispatch quantity against the packing it already has, and acts where they differ. A save that changes nothing changes nothing.
  • Removed packing rows and pallet placements are erased, not archived. Unlike a deleted invoice or purchase order, they leave no trace and appear on no list.
  • Taxes are worked out again on every save, from the current rates, quantities and charges.
  • Adding lines moves their purchase orders to In Progress, the same as when creating.

Last verified: 4 August 2026