Completing an invoice
TL;DR
This page covers marking an invoice as complete: what must be true first, what the window asks you for, and what changes afterwards. Completion cannot be reversed by anyone, so check the invoice before you start.
What this is for
Completing an invoice is the moment a draft becomes a real commercial document. The invoice takes its permanent number, and the shipment locks.
Complete is not the last state an invoice reaches. After it comes Delivered, which somebody marks by hand and which closes off even the few corrections completion leaves open. See Marking an invoice as delivered.
Completing an invoice cannot be undone. There is no button, no menu entry, and no path anywhere in Export ERP that returns a completed invoice to a draft. Nothing you can do afterwards will reopen it. Four things can still be corrected on a completed invoice: the exchange rate, the transport mode and the two ports. Nothing else. See [Changing an invoice](/books/invoices/page/changing-an-invoice); for anything beyond those four, the remedy is outside this system.
Before you start
- Every line on the invoice must be packed to its full dispatch quantity.
- Every row on the packing list must carry a gross weight above zero.
- The pallet requirements for this invoice must be met. What those are depends on Allow Pallet and Transport Mode. See When pallets are needed.
- You need the final invoice number to use, and the invoice date.
Completing an invoice
- Open Invoice in the top menu.
- Select the Mark as Complete (tick) icon on the invoice's row. The icon appears only on In Progress rows.
- The "Mark as Complete" window opens.
- Check Invoice Number and Invoice Date.
- Select Mark as Complete. (Cancel closes the window and changes nothing.)
You return to the list and see "Invoice has been completed successfully!".
The window is a form, not a confirmation
This is the part people misread. The window does not only ask "are you sure". It takes two pieces of information and saves them both.
Invoice Number arrives pre-filled with the next number available for this company. You can change it, and whatever is in the box when you select Mark as Complete becomes the invoice's permanent number. Your company's prefix or postfix sits beside the box, greyed, showing how the finished number will read; you type only the number part.
Invoice Date arrives holding the invoice's current date. The date you leave in this box replaces the date on the invoice. A date typed here overwrites what was entered when the invoice was created.
So treat the window as data entry. Read both boxes before selecting the button.
What the system checks, in order
The checks run in this order and stop at the first failure.
| # | What is checked | Message when it fails |
|---|---|---|
| 1 | The invoice is not already complete | "This Invoice has already been marked as complete." |
| 2 | The number sequence is not already used by this company | "This Invoice Number sequence (7) has already been used by another user. Please refresh and try again." (your number will differ) |
| 3 | Every line is packed to its full dispatch quantity, and no packing row has a gross weight of zero | "Invoice cannot be marked as complete as some products are not fully packaged." |
| 4 | The pallet requirements are met | "Invoice cannot be marked as complete as some products are not fully palletized." |
| 5 | For a By Air invoice with Allow Pallet set to Yes and no pallet manifest, that you have confirmed you meant it | "No pallet has been configured for this By Air invoice. Please confirm if you want to proceed without a pallet." |
Check 3 covers two different problems with one message: unpacked quantity and a missing weight. Check the packing list for both.
Check 5 is a question, not a refusal. It appears as a window carrying that message, with Yes, complete it! and No, cancel. Confirming lets the completion go ahead without pallets.
The Invoice Number and Invoice Date boxes are checked before any of this. An empty, non-numeric, over-long or already-used number is refused first.
What changes at completion
- The invoice takes its permanent number. The draft number stops being the one that matters.
- The invoice date is set to whatever was in the window.
- The status becomes Complete. The Delete and Mark as Complete icons disappear from the row. The Edit icon stays, but now opens a much narrower screen. Two icons appear in their place: Change History and Mark as Delivered.
- The packing list becomes Complete too. It can no longer be edited.
- The pallet manifest becomes Complete. It can no longer be edited.
- The documents stop saying DRAFT. Every document now carries the real number, and downloaded files are named with it. See About documents.
Draft numbers
An invoice is given a draft number the moment it is created. It is built from the company's own invoice numbering: its pattern as a prefix or a postfix, and the next sequence number, with -DRAFT on the end. A company using the pattern EXG as a prefix produces draft numbers reading EXG12-DRAFT. Set as a postfix, the same company produces 12EXG-DRAFT. Any separator you see is part of the pattern the company entered.
Draft numbers are counted separately from invoice numbers, so the draft sequence and the final sequence are not the same run of numbers.
The draft number is kept after completion. It is not cleared, and it stays visible in the Draft ID column of the invoice list. It is only ever a working label: it appears on no document and in no downloaded file name.
IMAGE PLACEHOLDER: completing-an-invoice-number-lifecycle-01 · timeline diagram · status: pending
Shows: how one invoice's numbers change from creation to completion
Must include: four stages left to right: created (draft number ending -DRAFT, no invoice number, documents show DRAFT or N/A), edited (unchanged), completed (permanent invoice number assigned, invoice date set from the completion window, draft number kept and still shown in the Draft ID column), delivered (nothing further changes, and no number moves); a note that the tax invoice shows N/A rather than DRAFT before completion; a note that completion cannot be reversed; a note that the exchange rate, transport mode and ports remain correctable between completed and delivered, and not after
Must not show: any real customer, company or invoice number
Alt text (draft): An invoice carries a draft number ending in -DRAFT from creation until completion. Completing it assigns the permanent invoice number and sets the invoice date from the completion window. The draft number is kept and stays in the Draft ID column. Completion cannot be reversed. Between completion and delivery the exchange rate, transport mode and ports can still be corrected; marking the invoice as delivered closes that window and changes no number.
Errors you may see
| What happened | What you see |
|---|---|
| The invoice was completed by someone else while your window was open | "This Invoice has already been marked as complete." |
| Someone used this number sequence while your window was open | "This Invoice Number sequence (7) has already been used by another user. Please refresh and try again." |
| A line is not fully packed, or a packing row has no gross weight | "Invoice cannot be marked as complete as some products are not fully packaged." |
| The pallet requirements are not met | "Invoice cannot be marked as complete as some products are not fully palletized." |
| By Air, pallets allowed, no manifest built | "No pallet has been configured for this By Air invoice. Please confirm if you want to proceed without a pallet." |
| The number box is empty | "Please enter invoice number." |
| The number contains anything but digits | "Invoice number must be a number." |
| The number is too long | "Invoice number must be less than or equal to 10 digits." |
| Another invoice already carries this number | "Invoice number already exists." |
| No date in the window | "Please select invoice date." |
| The date is outside the window | "Date must be after or equal to 01-04-2026." / "Date must be before or equal to 31-07-2026." (your dates will differ) |
| Something else went wrong | "Something went wrong. Please try again later." |
When you cannot complete an invoice works through each refusal and what to do about it.
What happens behind the scenes
- Taxes are not worked out again at completion. They are frozen as they stood at the last save of the invoice. This matters: if a rate, an additional charge or an exchange rate was changed and the invoice was not saved afterwards, the tax on the completed invoice reflects the older figures. Save the invoice before completing it.
- The invoice number is checked twice: once against every invoice in the system, and again against this company's own numbering. The second check is what produces the "already been used by another user" message.
- The packing list and pallet manifest are locked in the same action, without a separate message for either.
- Nothing about the documents is stored. They are still built fresh each time; only the number they carry has changed.
- Numbers are never reused. Both sequences are worked out from the highest number this company has already used, counting deleted invoices as well. Deleting an invoice does not free its number for the next one.
FAQs
Can I undo completing an invoice?
No. There is no button, no menu entry, and no path anywhere in Export ERP that returns a completed invoice to a draft. Four things can still be corrected on a completed invoice, each one recorded in its change history: the exchange rate, the transport mode and the two ports. For anything else, the remedy is outside this system.
Can I change the invoice number the window suggests?
Yes. The Invoice Number box arrives pre-filled with the next number available for this company, but whatever is in the box when you select Mark as Complete becomes the invoice's permanent number. You type only the number part; the company's prefix or postfix sits greyed beside it.
Why did the invoice date change after I completed it?
The Mark as Complete window is a form, not a confirmation. The date you leave in its Invoice Date box replaces the date on the invoice, overwriting what was entered when the invoice was created. Read both boxes before selecting the button.
What does "not fully packaged" actually mean?
That message covers two different problems: a line not packed to its full dispatch quantity, or a packing row with a gross weight of zero. Check the packing list for both.
Why is the tax on my completed invoice wrong?
Taxes are not worked out again at completion; they are frozen as they stood at the last save of the invoice. If a rate, an additional charge or an exchange rate was changed without saving afterwards, the completed invoice reflects the older figures, so save the invoice before completing it.
Does deleting an invoice free its number for the next one?
No. Numbers are never reused; both sequences are worked out from the highest number the company has already used, counting deleted invoices as well.
Related pages
- Creating an invoice: where the draft begins
- Changing an invoice: the last chance to change anything
- Marking an invoice as delivered: the step after this one
- The change history: what was corrected after completion, and why
- Finding invoices: how completed invoices appear in the list
- When you cannot complete an invoice: every refusal and its remedy
- When pallets are needed: what check 4 is testing
- About documents: what completion changes on the paperwork
- The different numbers: draft number, invoice number, sales order number
Last verified: 22 September 2026
No comments to display
No comments to display