Pallets Configuring pallets for sea shipments: pallet records, allocating cartons, and box serial ranges. When pallets are needed TL;DR This page answers one question: does this invoice need pallets at all. Two settings on the invoice decide it, Allow Pallet and Transport Mode, and together they also decide what is checked when you complete the invoice. Read it before building a manifest, or when completion is refused for pallets. What a pallet manifest is A pallet manifest says how a shipment's packed cartons are stacked onto physical pallets: how many pallets, what size each one is, how heavy it is, and which cartons sit on it. The pallet totals feed the shipment's paperwork, including the gross weight with pallets. Each manifest belongs to one invoice, and an invoice can have at most one manifest at a time. What must exist first Two things, in this order: The invoice. It must not be complete, and its Allow Pallet setting must be Yes. The invoice's packing list. It only has to be saved: it does not have to be finished. A packing list still in Draft is enough to start pallet work. Without a saved packing list, the pallet screens have nothing to place. Picking such a customer shows: "No packaging configurations found for this customer. Please create a packaging list first.". When a manifest is required Whether pallet work is required depends on two settings on the invoice: Allow Pallet and Transport Mode. Find your own combination in this table. The checks run when someone tries to mark the invoice as complete. Allow Pallet Transport Mode What is required No Any Nothing. The pallet screens refuse this invoice entirely. Yes Shipment A manifest must exist. Every pallet on it needs a size and a weight above zero. The manifest's total quantity must equal both the invoice total and the packing list total. Yes By Air A manifest is optional. If one exists, every pallet on it needs a size and a weight above zero. Completing without one asks for confirmation first: "No pallet has been configured for this By Air invoice. Please confirm if you want to proceed without a pallet.". Yes Not set A manifest must exist, but its sizes and weights are never checked, and neither are its quantities. An empty-looking manifest passes. Transport Mode can be left unset on invoices whose destination country is the company's own country. For those, only the last row of the table applies. When a required manifest is missing or unfinished, completing the invoice stops with: "Invoice cannot be marked as complete as some products are not fully palletized.". IMAGE PLACEHOLDER: when-pallets-are-needed-decision-01 · diagram · status: pending Shows: the two invoice settings deciding what pallet work is required Must include: two inputs, Allow Pallet and Transport Mode, feeding a decision that ends in one of four outcomes: nothing required; manifest with sizes, weights and matching quantities; optional manifest with a confirmation step; manifest required but never checked Must not show: any real invoice data; code or file names; permission names Alt text (draft): Two settings, Allow Pallet and Transport Mode, flow into a decision. Allow Pallet set to No ends in nothing required. Yes with Shipment ends in a full manifest with sizes, weights and matching quantities. Yes with By Air ends in an optional manifest and a confirmation question. Yes with no transport mode ends in a manifest that is required but never checked. Where the two settings live Both sit on the invoice form, under the labels Transport Mode and Allow Pallet. They are chosen when the invoice is created and can be changed by editing the invoice. Allow Pallet starts as Yes. Turning Allow Pallet off destroys pallet work Changing an invoice's Allow Pallet from Yes to No permanently destroys every pallet for that invoice, and everything on it the moment the invoice edit is saved. There is no undo and nothing to restore. When the invoice already has pallets, the invoice edit screen does ask first: "Disabling pallets will permanently delete all created pallet records associated with this invoice upon submitting. This action cannot be undone.". Answering "Yes, delete" and then saving the invoice carries it out. That change is made on the invoice, not here. See the Invoices pages. The two statuses A manifest is either Draft or Complete. Draft: the manifest can still be opened and changed. Complete: the manifest is locked. Nothing on the pallet screens moves a manifest to Complete; it happens automatically when the invoice is marked as complete. Nothing ever moves it back. Once the invoice is complete, opening the pallet editor for it answers: "This invoice is complete. Pallets cannot be edited.". FAQs Why is completing my invoice refused because of pallets? A required manifest is missing or unfinished, so completion stops with "Invoice cannot be marked as complete as some products are not fully palletized.". On a Shipment invoice the manifest must exist, every pallet needs a size and a weight above zero, and the manifest's total quantity must equal both the invoice total and the packing list total. Why do the pallet screens refuse my invoice entirely? Its Allow Pallet setting is No. With that setting, nothing is required and the pallet screens will not take the invoice at all. Can I start pallet work while the packing list is still in Draft? Yes. The packing list only has to be saved, not finished. A packing list still in Draft is enough to start pallet work. Does a By Air invoice need a pallet manifest? No, a manifest is optional there. If one exists, every pallet on it needs a size and a weight above zero, and completing without one asks for confirmation first. What happens if I switch Allow Pallet from Yes to No? Every pallet for that invoice, and everything on it, is permanently destroyed the moment the invoice edit is saved. The invoice edit screen asks first when pallets already exist, but there is no undo and nothing to restore. Can I change a manifest after the invoice is complete? No. The manifest moves to Complete automatically when the invoice is marked as complete and is locked; nothing ever moves it back. Opening the pallet editor then answers "This invoice is complete. Pallets cannot be edited.". Related pages Building a pallet manifest: the procedure, step by step When pallet work changes on its own: the silent side of this feature Finding pallet manifests: the list screen How packing works: the packing list a manifest is built from Last verified: 31 July 2026 Building a pallet manifest TL;DR This page covers building a pallet manifest: describing each pallet and placing packed cartons on it. Nothing checks that you placed every carton when you save, so a half-finished manifest saves without complaint and the problem surfaces later, at completion. What this is for This page walks through building an invoice's pallet manifest: choosing the invoice, describing each pallet, and placing packed cartons onto them. Before you start You need an invoice that meets all four of these. The invoice picker only offers invoices that pass: Condition What you see when it is not met The invoice is not complete The invoice is missing from the picker. Reaching its editor another way answers: "This invoice is complete. Pallets cannot be edited.". Allow Pallet is Yes on the invoice The invoice is missing from the picker. Reaching its editor another way answers: "Pallets are not allowed for this invoice.". A packing list has been saved for the invoice The customer's invoice picker stays empty and shows "No packaging lists found for this customer", with the message "No packaging configurations found for this customer. Please create a packaging list first.". No manifest exists yet for the invoice The invoice is missing from the picker. Saving a second manifest another way answers: "A pallet configuration already exists. Please use the edit page to update it.". The packing list only has to exist. It can still be in Draft. Building the manifest Open Pallet in the menu, then select Add new pallet. The "Add Pallet" screen opens. Pick a customer under Select Customer, then an invoice under Select Invoice. The screen loads a table of Available Packaging Units, listing every ungrouped packing row and every carton group with its total, allocated, and remaining cartons. It also shows one empty pallet card labelled "Pallet 1". This first empty pallet is not saved. Nothing on this screen is stored until you select Save. Leaving before Save discards everything entered. Describe the pallet. Pallet Size (L × W × H) is free text. Whatever you type here is what appears on the documents, exactly as typed. The label suggests length × width × height, but nothing enforces any shape. Pallet Weight (Kg) is the weight of the empty pallet itself, in kilograms; it is added on top of the cartons' gross weight. It starts at 0. You may leave size and weight as they are and still Save. But a pallet saved with an empty size or a zero weight quietly blocks the invoice from ever completing (except on invoices with no transport mode set). Nothing flags it until someone tries to complete the invoice. Fill both in before you walk away. Place cartons. In the row under the pallet, pick a unit from Select packaging item. Each option reads like "PRODUCT [12 carton(s)]". Picking one allocates 1 carton straight away. Change the amount in Cartons to Place. The field is capped at what remains; typing more snaps back with "Maximum 12 carton(s) available for this packaging unit." (your number will differ). Add more rows with Add Package Item, and more pallets with Add New Pallet. The same unit may be placed on several pallets. Box numbers carry on across the split: 5 cartons on Pallet 1 and 5 on Pallet 2 become box ranges "1 TO 5" and "6 TO 10". A fully placed unit shows its option greyed out with "⚠️ Full" and its Remaining count at 0 in red. Placing every carton is not enforced at Save. A half-allocated manifest saves without complaint. On Shipment invoices the shortfall only surfaces later, when completing the invoice fails. Select Save. On success the screen moves to "Edit Pallet" and shows "Pallet configuration saved successfully!". Removing a pallet asks first: "Are you sure you want to remove this pallet?", then "This pallet contains packaged items which will be removed from the manifest.". Removing an item row asks: "Are you sure you want to remove this item?", then "The packaging item will be removed from this pallet.". Both only change the screen; Save makes them real. IMAGE PLACEHOLDER: building-a-pallet-manifest-split-01 · screenshot-style illustration · status: pending Shows: one packing unit's cartons allocated across two pallets with continuing box ranges Must include: the Available Packaging Units table with a unit of ten cartons; two pallet cards each holding five of them; box ranges reading 1 TO 5 on the first pallet and 6 TO 10 on the second Must not show: any real product, customer, or invoice data; code or file names Alt text (draft): A packaging unit of ten cartons is placed five and five onto two pallet cards. The first pallet's row shows box range 1 TO 5 and the second carries on with 6 TO 10, because box numbers continue across a split. Errors you may see What happened Message Save with a row that has cartons but no unit picked "Please select a packaging item for the row on Pallet 1." Save with a unit picked but no carton count "Cartons to place must be greater than 0 on Pallet 1." Save with a pallet holding no rows at all "Pallet 1 has no items. Please add at least one package item." Pallet size longer than 255 characters "Pallet size cannot exceed 255 characters on Pallet 1." Pallet weight too large "Pallet weight must be less than or equal to 15 digits on Pallet 1." Removing the only pallet "A pallet manifest must contain at least one pallet." Removing the only item row of a pallet, on the Add screen "A pallet must have at least one package item." More cartons placed than exist, caught at Save "Carton overallocation detected. You are trying to allocate 13 carton(s) but only 12 are available for this packaging unit." (your numbers will differ) The invoice was completed while you worked "This invoice is complete. Pallets cannot be saved." (or "…cannot be updated." when editing) A manifest was created for this invoice while you worked "A pallet configuration already exists. Please use the edit page to update it." Something failed inside the system "Something went wrong. Please try again later." followed by raw technical text The last row is special: the failure message can carry raw technical wording from inside the system after it. Do not try to interpret that part. Report the whole message to your administrator. What happens behind the scenes Saving replaces the manifest's item rows wholesale. The pallets keep their numbers, but the rows on them are rebuilt from what the screen holds. Each placed row stores its box range and its quantity, worked out as cartons × pieces per carton from the packing list. The invoice's pallet totals (pallet count, cartons, net weight, gross weight, gross weight with pallets) are recalculated and written to the invoice at every Save. Weights on this screen show six decimal places. After any later packing change they are re-rounded to three, so the displayed precision can drop on its own. FAQs Why is my invoice missing from the invoice picker? The picker only offers invoices that pass all four conditions: the invoice is not complete, Allow Pallet is Yes, a packing list has been saved for it, and no manifest exists for it yet. If any one fails, the invoice does not appear. Is the "Pallet 1" card I see already saved? No. Nothing on the Add Pallet screen is stored until you select Save, and leaving before Save discards everything entered. Can I save a manifest without placing every carton? Yes. Placing every carton is not enforced at Save, so a half-allocated manifest saves without complaint. On Shipment invoices the shortfall only surfaces later, when completing the invoice fails. What happens if I save a pallet with no size or a zero weight? It saves, but it quietly blocks the invoice from ever completing, except on invoices with no transport mode set. Nothing flags it until someone tries to complete the invoice, so fill both in before you walk away. Can I split one packaging unit across several pallets? Yes, the same unit may be placed on several pallets. Box numbers carry on across the split: 5 cartons on Pallet 1 and 5 on Pallet 2 become box ranges "1 TO 5" and "6 TO 10". Does removing a pallet or item row take effect immediately? No. Both removals ask for confirmation but only change the screen; Save makes them real. Related pages When pallets are needed: whether your invoice needs this at all When pallet work changes on its own: what packing changes do to a saved manifest Finding pallet manifests: the list screen Building a packing list: the packing this screen places Last verified: 31 July 2026 When pallet work changes on its own TL;DR This page explains why pallet work changes without anyone touching it. Every correction listed here is made by Export ERP itself when a packing list is saved, with no message of any kind. Read it when a manifest looks wrong, or before you change packing on an invoice that already has pallets. Read this first A pallet manifest is built on top of the packing list. When the packing list changes, the manifest is corrected to match, silently, every time the packing list is saved. No message, no warning, no note anywhere tells you it happened. This page lists every correction, what you see afterwards, and what to do about it. None of this needs the pallet screens to be open. It happens in storage, whoever saves the packing change. Cartons that no longer exist are taken off the pallets What triggers it: a packing row is removed, or rows are grouped or ungrouped, and the packing list is saved. The rows the manifest pointed at are gone or have changed identity. What you see afterwards: the placements for those cartons have vanished from the manifest. Grouping is enough. Placements for the rows that went into the group disappear, and the new group starts unplaced. What to do: open the manifest and place the new rows or the new group again. Extra cartons are taken back, newest pallets first What triggers it: the packing list now holds fewer cartons of a unit than the manifest has placed, for example a quantity was reduced. What you see afterwards: placements shrink until they fit. The correction walks the pallets from the highest pallet number backwards: whole placements on the last pallets are removed first, then the last surviving placement is cut down to the remainder. Pallet 1 keeps its cartons the longest; the highest-numbered pallets lose theirs first. What to do: check the late pallets. They are the ones that were emptied or trimmed. Placed quantities are corrected What triggers it: the pieces per carton changed on the packing list. What you see afterwards: each placement's quantity is rewritten as cartons × the new pieces per carton. The manifest's totals move with it. What to do: nothing, usually, but on a Shipment invoice re-check that the manifest total still matches, or completing will fail. An empty pallet is removed What triggers it: every placement on one pallet was taken off by the corrections above. What you see afterwards: the pallet itself is gone from the manifest, along with its size and weight. What to do: if the pallet should exist, add it again and re-place its cartons. An empty manifest deletes itself What triggers it: the corrections empty every pallet, for example the whole packing list was rebuilt, so every old row disappeared. What you see afterwards: the manifest is gone. Its row in the pallet list stays visible but flips to a red "Delete" status with no edit action left. Opening the pallet editor for that invoice answers: "No pallet record found for this invoice. Please create a pallet first.". The invoice reappears in the Add Pallet invoice picker, ready for a fresh manifest. This is not an error, and the work was not lost by mistake. The manifest described packing that no longer exists, so it was removed. Build a new one against the current packing list. IMAGE PLACEHOLDER: when-pallet-work-changes-empty-01 · infographic · status: pending Shows: a packing change emptying a manifest and the manifest removing itself Must include: a packing list being changed and saved; the change flowing into the pallet manifest with placements disappearing pallet by pallet from the highest number backwards; the emptied manifest ending as a red Delete row in the pallet list and the editor inviting a fresh start Must not show: any real product, customer, or invoice data; code or file names; any warning dialog, because none appears Alt text (draft): A saved packing change flows silently into the pallet manifest. Placements vanish from the highest-numbered pallets first, empty pallets disappear, and when nothing is left the manifest removes itself. Its list row turns into a red Delete status and the editor offers to create a new manifest. Turning Allow Pallet off destroys everything What triggers it: someone edits the invoice and changes Allow Pallet from Yes to No. This is the one change that asks first. The invoice edit screen warns: "Disabling pallets will permanently delete all created pallet records associated with this invoice upon submitting. This action cannot be undone.". What you see afterwards: every pallet and every placement for that invoice is destroyed permanently: not marked removed, destroyed. The pallet list row is gone entirely. There is nothing to restore. What to do: be certain before confirming. The change is made on the invoice. See the Invoices pages. The habit: after changing a packing list Any time you, or anyone, changes and saves a packing list for an invoice that has pallets: Open the manifest, or notice its list row now says "Delete". Check the highest-numbered pallets first; corrections land there. Re-place anything that was grouped, ungrouped, or newly added. Confirm every pallet still has a size and a weight above zero. On a Shipment invoice, confirm the manifest total again matches the invoice and packing totals. Make this a habit and the silent corrections become routine instead of a surprise at completion time. FAQs Why did placements vanish from my manifest when nobody touched the pallet screens? Someone changed and saved the packing list. The manifest is corrected to match every time the packing list is saved, silently and with no message, and none of it needs the pallet screens to be open. Why is my whole manifest gone and its list row marked "Delete"? The corrections emptied every pallet, so the manifest removed itself. This is not an error: it described packing that no longer exists. The invoice reappears in the Add Pallet picker, so build a new manifest against the current packing list. Which pallets lose cartons when a packing quantity is reduced? The correction walks the pallets from the highest pallet number backwards, so the highest-numbered pallets lose their cartons first and Pallet 1 keeps its cartons the longest. Check the late pallets after a reduction. Does grouping cartons on the packing list affect my pallets? Yes. Grouping is enough: placements for the rows that went into the group disappear, and the new group starts unplaced. Open the manifest and place the new group again. Can I restore pallets destroyed by turning Allow Pallet off? No. Every pallet and every placement for that invoice is destroyed permanently, not marked removed, and there is nothing to restore. It is the one change that asks for confirmation first, so be certain before confirming. What should I check after anyone saves a packing change on an invoice with pallets? Open the manifest, check the highest-numbered pallets first, re-place anything grouped, ungrouped or newly added, and confirm every pallet still has a size and a weight above zero. On a Shipment invoice, also confirm the manifest total again matches the invoice and packing totals. Related pages When pallets are needed: which invoices these checks apply to Building a pallet manifest: rebuilding after a correction Finding pallet manifests: how a removed manifest appears in the list Grouping cartons: the packing-side action that unplaces cartons here Last verified: 31 July 2026 Finding pallet manifests TL;DR This page covers the pallet list: what it shows, how to search and filter it, and what the exports contain. Only invoices that already have a manifest appear here, so an invoice missing from the list has simply never had one. There is no delete action anywhere on the pallet screens. What this is for The pallet list shows every manifest that exists, one row per invoice with a manifest. This page covers what the list shows, how to search and filter it, and what the exports contain. Open Pallet in the menu. The screen is headed "Pallet". Which invoices appear here Only invoices that already have a pallet manifest are listed. An invoice that needs pallets but has none yet is absent. Its absence from this list is not a status, only a gap. To start one, use Add new pallet at the top right, which some readers will not see. Manifests that were removed still appear, marked with the "Delete" status. The list screen Column What it holds ID The manifest's number Status "Draft", "Complete", or "Delete" as a coloured badge Company The company name from the packing list, shortened with a hover after 20 characters Customer The customer name, shortened the same way Invoice / Draft No The invoice number, or the draft number while the invoice has none Total Pallets A badge reading like "3 Pallets", or "Not Palletized" at zero Total Cartons Cartons placed across all pallets Total Net Weight (Kg) Net weight to three decimal places Total Gross Weight (Kg) Gross weight including the pallets' own weight, to three decimal places The search box (placeholder "Search") waits about a second after you stop typing. It matches status words, company, customer, invoice or draft number, pallet and carton counts, weights, and dates. Ten rows show by default; the selector under the list offers All, 10, 25, 50, 100 and 500. The default order is by status: Draft first, then Complete, then Delete. Within Complete, newer invoice numbers come first. Statuses, and removed manifests Draft: grey badge. The manifest can still be changed. Complete: green badge. Locked; set when the invoice completed. Delete: red badge. The manifest was removed, usually because packing changes emptied it, or its invoice was removed. A removed manifest always shows the red "Delete" badge, even when it was Complete first. Note the packing list screen decides the same situation the other way around. There, a removed Complete packing list keeps its green "Complete" badge. The two lists disagree on purpose when you compare them side by side. The status filter offers no "Delete" choice, so removed rows cannot be isolated, but searching for the word Delete finds them. Filters Select Status: "All Statuses", "Draft", "Complete". Select Company: changing it clears the customer choice. Select Customer. Actions on a row Action When it appears View (info icon) Always, including on removed manifests, where it shows the manifest as it stood Edit (pencil icon, named "Configure Pallets") Only while the manifest is not Complete and not removed There is no delete action on this screen, or anywhere on the pallet screens. A manifest disappears only from the outside: packing changes empty it, the invoice is removed, or Allow Pallet is switched off on the invoice. Exporting the list The Export button offers Excel, Excel All, CSV, CSV All, PDF, and PDF All. The plain variants take the rows on the current page; the All variants take every row matching the current search and filters. The PDF variants are titled "Pallet Report". Exports contain: ID, Status, Company, Customer, Invoice / Draft No, Total Pallets, Total Cartons, Total Net Weight (Kg), Total Gross Weight (Kg). The action column is not exported. What happens behind the scenes The row's company and customer names are the ones frozen onto the packing list, not today's master data. Weights here show three decimal places, though the pallet editor works to six. The stored value is re-rounded to three after any later packing change. FAQs Why is an invoice missing from this list? Only invoices that already have a pallet manifest are listed. An invoice that needs pallets but has none yet is absent; its absence is not a status, only a gap. Start one with Add new pallet at the top right. How do I delete a manifest from this screen? You cannot. There is no delete action on this screen or anywhere on the pallet screens. A manifest disappears only from the outside: packing changes empty it, the invoice is removed, or Allow Pallet is switched off on the invoice. Why does a manifest show "Delete" here but its packing list still shows "Complete"? The two lists decide the same situation the opposite way on purpose. A removed manifest always shows the red Delete badge, even when it was Complete first, while a removed Complete packing list keeps its green Complete badge. Why is there no "Delete" choice in the status filter? The filter offers only All Statuses, Draft and Complete, so removed rows cannot be isolated with it. Searching for the word Delete finds them instead. Why do the weights here show fewer decimal places than the pallet editor? The list shows three decimal places while the editor works to six. The stored value is re-rounded to three after any later packing change, so the displayed precision can drop. Why can't I edit a row? The Edit action, named Configure Pallets, appears only while the manifest is not Complete and not removed. The View action stays available on every row, including removed manifests, where it shows the manifest as it stood. Related pages When pallets are needed: why an invoice may be missing from this list Building a pallet manifest: the Add new pallet path When pallet work changes on its own: how rows end up at "Delete" Finding packing lists: the packing-side list, with the opposite badge rule Last verified: 31 July 2026