Master Data Setup Reference records you set up before daily work: Port of Loading, Carton, Currency, Unit of Measurement, Company, Customer, and Product. Port of Loading TL;DR This page covers the Port of Loading list: adding a port, changing one, switching it off, and removing it. The same list fills both the Port of Loading and Port of Discharge boxes on an invoice. An invoice keeps its own copy of the port name, so renaming a port never changes invoices already raised. What this is for A port of loading is a named port that your shipments pass through. You create one here so it can be chosen on an invoice. The same list fills both the "Port of Loading" and the "Port of Discharge" boxes on an invoice, so any port you add can be used as either. Ports are shared across every company in the system. Unlike orders and customers, everyone sees the same list of ports. Where to find it Master → Port of Loading in the top menu. The list screen The list shows every port, ten rows at a time. You can change that to 25, 50, 100, 500 or All using the selector under the list. A search box at the top filters the list as you type (it settles about a second after you stop), matching against the ID and the port name. The list starts sorted by ID, smallest first. If you can make changes, a button above the list offers Add new port of loading. The columns: ID: the port's number in the system Port Name: the name; long names are shortened (hover to see the whole thing) Status: a switch you can flip if you can make changes; otherwise it reads Active or Deactive Action: Edit and Delete icons if you can make changes; otherwise a dash Fields Field Rules Notes Port Name Required. Up to 255 characters. Must not match a port that already exists. The name is checked as you type and again when you save. A port that has been removed frees its name for reuse. Errors you may see What happened What you see You left the name empty "Please enter port name." The name is too long "Port name must be less than or equal to 255 characters." Another port already has this name "Port name already exists." You tried to switch off a port used on an invoice that is still In Progress "This record cannot be deactivated as it is currently in use by other active records in the system!" You tried to remove a port used on any invoice "This record cannot be deleted as it is associated with existing records in the system!" Adding a port Open Master → Port of Loading. Select Add new port of loading. The "Add Port of Loading" page opens. Enter the Port Name. Select Save. (Reset empties the box. Cancel returns to the list without saving.) You return to the list and see "Port of Loading has been created successfully!". The new port is active straight away and can be used on invoices immediately. Changing a port In the list, select the Edit (pencil) icon on the port's row. The "Edit Port of Loading" page opens. Change the Port Name. Select Update. You see "Port of Loading has been updated successfully!" There is no Reset button on this page. Saving without changing anything is fine. The name check ignores the port you are editing, so it will not complain that the name already exists. Switching a port on or off is done from the list, not this page: Select the switch in the Status column. Confirm with Yes, change it! You see "Status has been updated successfully!" A port cannot be switched off while it is used (as either port) on an invoice that is still In Progress. Switching a port back on is never blocked. Removing a port In the list, select the Delete icon on the port's row. Confirm with Yes, delete it! You see "Port of Loading has been deleted successfully!" A port cannot be removed while any invoice refers to it, as either Port of Loading or Port of Discharge, whatever that invoice's status. The message does not say which invoice is blocking it, so you will need to look through your invoices for the port name. Exporting the list The Export menu offers Excel, Excel All, CSV, CSV All, PDF and PDF All. Exports contain the ID, Port Name and Status columns only. The "All" versions cover every port in the system. The others cover only the rows currently on screen. The PDF is titled "Port of Loading Report". What happens behind the scenes Only active ports appear in the invoice dropdowns. Switching a port off removes it from those dropdowns but changes nothing on invoices that already use it. An invoice keeps its own copy of the port name from the moment you choose it. Renaming a port does not change invoices already raised. They go on printing the old name unless someone edits the invoice and re-selects the port. Removing a port frees its name. You can create a new port with the same name afterwards. In the list, a name longer than 20 characters is shortened with "…". Hover over it to see the whole name. FAQs Is there a separate list for Port of Discharge? No. The same list fills both the Port of Loading and Port of Discharge boxes on an invoice, so any port you add here can be used as either. I renamed a port. Why do old invoices still print the old name? An invoice keeps its own copy of the port name from the moment the port is chosen, so renaming a port does not change invoices already raised. They go on printing the old name unless someone edits the invoice and re-selects the port. Why can't I switch a port off? A port cannot be switched off while it is used, as either port, on an invoice that is still In Progress. Switching a port back on is never blocked. Why can't I delete a port, and which invoice is blocking it? A port cannot be removed while any invoice refers to it, as either Port of Loading or Port of Discharge, whatever that invoice's status. The message does not say which invoice is blocking it, so you will need to look through your invoices for the port name. Why is a port missing from the dropdowns on an invoice? Only active ports appear in the invoice dropdowns. If the port has been switched off, it no longer shows there, though invoices that already use it are unchanged. Can I reuse the name of a port that was removed? Yes. Removing a port frees its name, so you can create a new port with the same name afterwards. Related pages Master Data Setup: the module this page belongs to, with the other reference pages Invoices: where ports are chosen as Port of Loading and Port of Discharge Users & Roles: who can see and change each part of the system Last verified: 31 July 2026 Carton TL;DR This page covers cartons: the box types you pick when setting up products and when packing. It explains what blocks switching a carton off and what blocks removing it, which are different rules. A packing list keeps its own copy of a carton's name and size, so renaming one never reaches work already done. What this is for A carton is a box type used for packing. You set up each box type once: its name, its size, and its weight. It can then be picked when setting up products, when packing an invoice, and on a purchase order. Cartons are shared across every company in the system. Everyone sees the same list. Where to find it Master → Carton in the top menu. The list screen The list shows every carton, newest first, ten rows at a time. You can change that to 25, 50, 100, 500 or All using the selector under the list. A search box at the top filters the list as you type, matching the ID, name, size and weight. It settles about a second after you stop typing. If you can make changes, a button above the list offers Add new carton. The columns: ID: the carton's number in the system Carton Name: the name; long names are shortened (hover to see the whole thing) Carton Size: the size; long sizes are shortened the same way Carton Weight: the weight in kilograms Status: a switch you can flip if you can make changes; otherwise it reads Active or Deactive The last column holds Edit and Delete icons if you can make changes; otherwise a dash A name or size longer than 20 characters is shortened with "...". Hover over it to see the whole value. Fields Field Rules Notes Carton Name Required. Up to 255 characters. Two cartons may share a name. It is the size that must be different. Carton Size Required. Up to 255 characters. Must not match a size that already exists. The form suggests "Format: Length x Width x Height (e.g., 40 x 30 x 20 cm)." Any wording is accepted. The size is checked as you type and again when you save. A carton that has been removed frees its size for reuse. Carton Weight (Kg) Required. A number greater than 0, with up to 3 digits after the decimal point. The box rewrites what you type as you go. See below. What the Carton Weight box does as you type. Anything that is not a digit or a decimal point is removed. A second decimal point is dropped. Anything beyond three digits after the point is cut off, as is anything beyond sixteen digits before it. A point typed on its own gains a leading zero. None of this shows a message, so paste a value and check what is left in the box. Errors you may see What happened What you see You left the name empty "Please enter carton name." The name is too long "Carton name must be less than or equal to 255 characters." You left the size empty "Please enter carton size." The size is too long "Carton size must be less than or equal to 255 characters." Another carton already has this size "Carton size already exists." You left the weight empty "Please enter carton weight." The weight is not a number "Carton weight must be numeric." The weight is 0 or less "Carton weight must be greater than 0." You tried to switch off a carton a product is set to use "This record cannot be deactivated as it is currently in use by other active records in the system!" You tried to switch off a carton used by a row on a packing list that is still a draft "This record cannot be deactivated as it is currently in use by other active records in the system!" You tried to switch off a carton that a row on a draft packing list used before it joined a carton group "This record cannot be deactivated as it is currently in use by other active records in the system!" You tried to switch off a carton used by a carton group on a draft packing list "This record cannot be deactivated as it is currently in use by other active records in the system!" You tried to remove a carton a product is set to use "This record cannot be deleted as it is associated with existing records in the system!" You tried to remove a carton used by a row on any packing list, finished ones included "This record cannot be deleted as it is associated with existing records in the system!" You tried to remove a carton that a packing row used before it joined a carton group "This record cannot be deleted as it is associated with existing records in the system!" You tried to remove a carton used by any carton group "This record cannot be deleted as it is associated with existing records in the system!" Each of those two messages covers four separate conditions, and the message itself never says which one applies. The table above is the way to work it out. The comparison under "Removing a carton" shows where the two sets of conditions differ. Adding a carton Open Master → Carton. Select Add new carton. The "Add Carton" page opens. Fill in the Carton Name, Carton Size and Carton Weight. Select Save. (Cancel returns to the list without saving.) Reset returns the boxes to how they were when the page opened. On a new carton that means empty. If a save was refused and the page came back with your entries in it, Reset restores those entries. You return to the list and see "Carton has been created successfully!". The new carton is active straight away and can be picked immediately. Changing a carton In the list, select the Edit (pencil) icon on the carton's row. The "Edit Carton" page opens. Change what you need. Select Update. You see "Carton has been updated successfully!" There is no Reset button on this page. Saving without changing anything is fine. The size check ignores the carton you are editing. Switching a carton on or off is done from the list, not this page: Select the switch in the Status column. The confirmation asks "Are you sure you want to deactive this Carton?", which is the software's own wording. Switching one back on asks "Are you sure you want to active this Carton?" Confirm with Yes, change it! You see "Status has been updated successfully!" A carton cannot be switched off while any product uses it. Nor can it be switched off while it is part of a packing list that is still a draft. That applies whether it sits on a row of its own or inside a carton group. Switching a carton back on is never blocked. The conditions are not the same as the ones that block removal. See the comparison under "Removing a carton". A carton that has been switched off stops appearing in the lists where cartons are chosen. Nothing is greyed out and no message explains why it is missing. Removing a carton In the list, select the Delete icon on the carton's row. The confirmation asks "Are you sure you want to delete this Carton?" and warns "You won't be able to revert this!" Confirm with Yes, delete it! You see "Carton has been deleted successfully!" Removing a carton cannot be undone. There is no way to bring one back. A carton cannot be removed while any product uses it. It also cannot be removed while it appears in any packing list, even a finished one, or while a carton group refers to it. The message does not say which one is blocking it. This includes packing lists belonging to a shipment that has since been deleted. Deleting a shipment leaves its packing rows in place, and those rows still count as use. The message does not say that either. Switching off and removing are blocked by different things. Switching off is the lighter of the two. A carton you cannot remove can often still be switched off. Blocked while Switching off A product is set to use it. A packing list that is still a draft uses it, either on a row directly, or through a carton group on that draft list. Removing A product is set to use it. Any packing list uses it, finished ones included. Any carton group uses it, whatever state its packing list is in. In both cases a product blocks the action whether that product is switched on or off. A product that has been removed does not block either action. The practical difference: switching off looks only at packing lists still in draft, while removing looks at every packing list ever made. Once a shipment is packed and finished, its cartons can no longer be removed. They can still be switched off, which takes them out of the lists where cartons are chosen without disturbing anything already packed. That is the usual way to retire a carton that has been used. Exporting the list The Export menu offers Excel, Excel All, CSV, CSV All, PDF and PDF All. Exports contain the ID, Carton Name, Carton Size, Carton Weight and Status columns. The "All" versions cover every matching carton across all pages, not only the rows on screen. If the search box is filled in, the export contains only the cartons that match it. Clear the search first to export everything. The PDF is titled "Carton Report". What happens behind the scenes Only active cartons can be picked for products, packing and purchase orders. Switching a carton off removes it from those choices but changes nothing already saved. A packing list keeps its own copy of the carton's name and size, taken when the carton is chosen. Renaming a carton or changing its size never reaches packing lists that already hold a copy, not even ones still in draft. Choosing a different carton on a draft row replaces the copy with that other carton's details. The carton weight is stored for reference. It is not used in packing calculations. Gross weights there are typed in by hand. Removing a carton frees its size. You can create a new carton with the same size afterwards. FAQs Why can't I remove a carton even though I can switch it off? The two actions are blocked by different things, and switching off is the lighter of the two. Removing is blocked while any packing list ever made uses the carton, finished ones included, while switching off looks only at packing lists still in draft. Why did the weight I typed change on its own? The Carton Weight box rewrites what you type as you go: anything that is not a digit or a decimal point is removed, a second decimal point is dropped, and extra digits are cut off. None of this shows a message, so paste a value and check what is left in the box. Can two cartons have the same name? Yes. Two cartons may share a name; it is the size that must be different. I changed a carton's size. Why didn't my draft packing list update? A packing list keeps its own copy of the carton's name and size, taken when the carton is chosen, so changes never reach packing lists that already hold a copy, not even ones still in draft. Choosing a different carton on a draft row replaces the copy with that other carton's details. Why is a carton missing from the list where cartons are chosen? A carton that has been switched off stops appearing in those lists. Nothing is greyed out and no message explains why it is missing. Can I undo removing a carton? No. Removing a carton cannot be undone and there is no way to bring one back. The usual way to retire a used carton is to switch it off instead, which takes it out of the pickers without disturbing anything already packed. Related pages Master Data Setup: the other reference lists, including Port of Loading Packaging: where cartons are picked when packing an invoice Users & Roles: who can see and change each part of the system Last verified: 3 August 2026 Currency TL;DR This page covers the currency list, which arrives pre-filled with the world's currencies. You add one only if something is missing. Orders and invoices keep their own copy of a currency's name and sign, so renaming one never changes documents already raised. What this is for A currency is the money a company or customer deals in. You pick a currency when setting up each company and each customer, and orders and invoices then carry it through to printed documents. The list comes pre-filled with the world's currencies: the name is the three-letter code (USD, EUR, INR), the sign is the symbol, and the sub unit is the minor unit (Cents, Paisa). You only add one if something is missing. Currencies are shared across every company in the system. Everyone sees the same list. Where to find it Master → Currency in the top menu. The list screen The list shows every currency, newest first, ten rows at a time. You can change that to 25, 50, 100, 500 or All using the selector under the list. A search box at the top filters the list as you type (it settles about a second after you stop), matching the ID, name, sign and sub unit. If you can make changes, a button above the list offers Add new currency. The columns: ID: the currency's number in the system Currency Name: the name; long names are shortened (hover to see the whole thing) Currency Sign: the symbol; long signs are shortened the same way Sub Unit: the minor unit; shows "N/A" when blank Status: a switch you can flip if you can make changes; otherwise it reads Active or Deactive The last column holds Edit and Delete icons if you can make changes; otherwise a dash Fields Field Rules Notes Currency Name Required. Up to 255 characters. Must not match a currency that already exists. The name is checked as you type and again when you save. A currency that has been removed frees its name for reuse. Currency Sign Required. Up to 255 characters. The symbol printed on documents, such as $ or ₹. Sub Unit Optional. Up to 255 characters. The minor unit, such as Cents or Fils. Shows as "N/A" in the list when left blank. Errors you may see What happened What you see You left the name empty "Please enter currency name." The name is too long "Currency name must be less than or equal to 255 characters." Another currency already has this name "Currency name already exists." You left the sign empty "Please enter currency sign." The sign is too long "Currency sign must be less than or equal to 255 characters." The sub unit is too long "Sub unit must be less than or equal to 255 characters." You tried to switch off a currency that is in use "This record cannot be deactivated as it is currently in use by other active records in the system!" You tried to remove a currency that is in use "This record cannot be deleted as it is associated with existing records in the system!" Adding a currency Open Master → Currency. Select Add new currency. The "Add Currency" page opens. Fill in the Currency Name and Currency Sign. Add a Sub Unit if you want one. Select Save. (Reset empties the boxes. Cancel returns to the list without saving.) You return to the list and see "Currency has been created successfully!". The new currency is active straight away and can be picked immediately. Changing a currency In the list, select the Edit (pencil) icon on the currency's row. The "Edit Currency" page opens. Change what you need. Select Update. You see "Currency has been updated successfully!" There is no Reset button on this page. Saving without changing anything is fine. The name check ignores the currency you are editing. Switching a currency on or off is done from the list, not this page: Select the switch in the Status column. Confirm with Yes, change it! You see "Status has been updated successfully!" A currency cannot be switched off while any company or customer is set to it, while an open purchase order uses it, or while an invoice that is still In Progress uses it. (An "open" purchase order is one not yet complete.) Switching a currency back on is never blocked. Removing a currency In the list, select the Delete icon on the currency's row. Confirm with Yes, delete it! You see "Currency has been deleted successfully!" A currency cannot be removed while any company, customer, purchase order or invoice refers to it, whatever their state. The message does not say which one is blocking it. Exporting the list The Export menu offers Excel, Excel All, CSV, CSV All, PDF and PDF All. Exports contain the ID, Currency Name, Currency Sign, Sub Unit and Status columns. The "All" versions cover every currency in the system. The others cover only the rows currently on screen. The PDF is titled "Currency Report". What happens behind the scenes Only active currencies can be picked for companies, customers and purchase orders. Switching a currency off removes it from those choices but changes nothing already saved. An order or invoice keeps its own copy of the currency's name, sign and sub unit from the moment it is created. Renaming a currency does not change documents already raised. They go on printing the old name and sign. There are no exchange rates here. When a rate is needed, it is typed on the invoice itself; if left blank it counts as 1. Removing a currency frees its name. You can create a new currency with the same name afterwards. In the list, a name or sign longer than 20 characters is shortened with "…". Hover over it to see the whole value. FAQs Do I have to enter every currency we trade in? Usually not. The list comes pre-filled with the world's currencies, with the three-letter code as the name, the symbol as the sign, and the minor unit as the sub unit. You only add one if something is missing. Where do I set the exchange rate? Not here. There are no exchange rates in the currency list; when a rate is needed it is typed on the invoice itself, and if left blank it counts as 1. I renamed a currency. Why do old documents still print the old name and sign? An order or invoice keeps its own copy of the currency's name, sign and sub unit from the moment it is created, so renaming a currency does not change documents already raised. Why can't I switch a currency off? A currency cannot be switched off while any company or customer is set to it, while an open purchase order uses it, or while an invoice that is still In Progress uses it. Switching a currency back on is never blocked. Why can't I delete a currency, and what is blocking it? A currency cannot be removed while any company, customer, purchase order or invoice refers to it, whatever their state. The message does not say which one is blocking it. Related pages Master Data Setup: the other reference lists Purchase Orders: where the customer's currency is carried onto orders Invoices: where currency and the exchange rate appear on billing Users & Roles: who can see and change each part of the system Last verified: 31 July 2026 Unit of Measurement TL;DR This page covers units of measurement: how a product's quantity is counted, and whether it may carry decimal places. The unit decides the decimal rule, not the product. Changing a unit never reaches orders and invoices already created. What this is for A unit of measurement is how a product's quantity is counted: pieces, kilograms, sets. You pick one for each product, and it decides whether quantities may have decimal places and how many. The list comes pre-filled with a few common units such as PCS and KGS. Units are shared across every company in the system. Where to find it Master → Unit Of Measurement in the top menu. The list screen The list shows every unit, newest first, ten rows at a time. You can change that to 25, 50, 100, 500 or All using the selector under the list. A search box at the top filters the list as you type (it settles about a second after you stop), matching the ID, the unit name, the words Yes or No, and the decimal digit. If you can make changes, a button above the list offers Add new unit of measurement. The columns: ID: the unit's number in the system Unit Of Measurement: the name; long names are shortened (hover to see the whole thing) Decimal Allowed: a Yes or No badge Decimal Digit: how many decimal places are allowed; shows "N/A" when not set Status: a switch you can flip if you can make changes; otherwise it reads Active or Deactive The last column always holds a View icon that opens the unit's details; with change access it also holds Edit and Delete icons Fields Field Rules Notes Unit Of Mesurement Required. Up to 255 characters. Must not match a unit that already exists. Yes, the label on screen is spelled that way. Whatever you type becomes CAPITALS automatically. The name is checked as you type and again when you save. A unit that has been removed frees its name for reuse. Decimal Allowed Required. Yes or No. Whether quantities in this unit may have decimal places: Yes suits weights (KGS), No suits countable things (PCS). Decimal Digit Appears only when Decimal Allowed is Yes, and is then required. One digit, from 1 to 3. How many decimal places a quantity may carry. Errors you may see What happened What you see You left the name empty "Please enter unit of measurement." The name is too long "Unit of measurement must be less than or equal to 255 characters." Another unit already has this name "Unit of measurement already exists." You did not choose Yes or No "Please select decimal allowed." Decimal Allowed is Yes but the digit is empty "Please enter decimal digit." The digit is below 1 "Decimal digit must be greater than or equal to 1." The digit is above 3 "Decimal digit must be less than or equal to 3." You tried to switch off a unit that is in use "This record cannot be deactivated as it is currently in use by other active records in the system!" You tried to remove a unit that is in use "This record cannot be deleted as it is associated with existing records in the system!" Adding a unit Open Master → Unit Of Measurement. Select Add new unit of measurement. The "Add Unit Of Measurement" page opens. Fill in the name and choose Decimal Allowed. If you choose Yes, a Decimal Digit box appears. Fill that in too. Select Save. (Reset empties the boxes. Cancel returns to the list without saving.) You return to the list and see "Unit of measurement has been created successfully!". The new unit is active straight away and can be picked immediately. Changing a unit In the list, select the Edit (pencil) icon on the unit's row. The "Edit Unit Of Measurement" page opens. Change what you need. Select Update. You see "Unit of measurement has been updated successfully!" There is no Reset button on this page. Saving without changing anything is fine. The name check ignores the unit you are editing. Switching a unit on or off is done from the list, not this page: Select the switch in the Status column. Confirm with Yes, change it! You see "Status has been updated successfully!" A unit cannot be switched off while any product uses it, while an open purchase order lists it, or while an invoice that is still In Progress lists it. (An "open" purchase order is one not yet complete.) Switching a unit back on is never blocked. Removing a unit In the list, select the Delete icon on the unit's row. Confirm with Yes, delete it! You see "Unit of measurement has been deleted successfully!" A unit cannot be removed while any product, any purchase order line, or any invoice line refers to it. The message does not say which one is blocking it. Exporting the list The Export menu offers Excel, Excel All, CSV, CSV All, PDF and PDF All. Exports contain the ID, Unit Of Measurement, Decimal Allowed, Decimal Digit and Status columns. The "All" versions cover every unit in the system. The others cover only the rows currently on screen. The PDF is titled "Unit Of Measurement Report". What happens behind the scenes Only active units can be picked for products and purchase orders. Switching a unit off removes it from those choices but changes nothing already saved. A purchase order line keeps its own copy of the unit's name, and an invoice line copies it from the order line. Renaming a unit does not change orders or invoices already raised. Bulk product uploads match units by name. If you rename a unit, spreadsheets that still use the old name will stop matching. The Yes/No and digit settings travel with each invoice line at the time it is made, and control how quantities may be typed there. Removing a unit frees its name. You can create a new unit with the same name afterwards. In the list, a name longer than 20 characters is shortened with "…". Hover over it to see the whole name. FAQs Why did the name I typed turn into capitals? That is automatic. Whatever you type in the unit name box becomes capitals on its own. Why can't I type decimal places in a quantity? The unit decides that, not the product. If the unit's Decimal Allowed setting is No, quantities in that unit may not have decimal places; Yes suits weights such as KGS, No suits countable things such as PCS. Where did the Decimal Digit box go? It appears only when Decimal Allowed is Yes, and is then required. It takes one digit, from 1 to 3. I renamed a unit. Why did my product spreadsheet uploads stop working? Bulk product uploads match units by name, so spreadsheets that still use the old name will stop matching after a rename. Does renaming a unit change orders or invoices already raised? No. A purchase order line keeps its own copy of the unit's name, and an invoice line copies it from the order line, so renaming a unit does not change orders or invoices already raised. Why can't I switch off or remove a unit? A unit cannot be switched off while any product uses it, while an open purchase order lists it, or while an invoice that is still In Progress lists it. It cannot be removed while any product, purchase order line or invoice line refers to it, and the message does not say which one is blocking it. Related pages Master Data Setup: the other reference lists Purchase Orders: where units appear on order lines Invoices: where units and decimal settings shape quantity entry Users & Roles: who can see and change each part of the system Last verified: 31 July 2026 Product TL;DR This page covers products: the goods you sell, with their tax rate, unit and usual carton. Products are visible to everyone regardless of company, unlike customers and companies. A product's details are copied onto each order as it is created, so renaming one never changes paperwork already raised. What this is for A product is one item you sell: its name, how it is taxed, how it is measured, and which carton it usually ships in. Products are picked on every purchase order and flow from there to invoices and packing. Products are visible to everyone, whichever companies they work with. The menu places Product under "Company Data", but unlike customers and companies, a product belongs to no company. Everyone sees one shared list. Where to find it Menu: Company Data → Product. The list screen One row per product. Columns: ID, Product Name (shortened with a hover after 20 characters), Fixed Carton (a Yes or No badge), Carton Size, Unit of Measurement, GST Percentage, Status, and an actions column. The search box (placeholder "Search") settles about a second after typing stops. Ten rows show at a time; the selector under the list offers All, 10, 25, 50, 100 and 500. Buttons at the top right ("Add new product", "Upload", "Upload History") appear only for readers allowed to use them. Fields Field Rules Product Name Required. Must be unique: "Product name already exists.". Up to 255 characters. To the Order Name Required, up to 255 characters. The alternative wording printed on "to the order" paperwork. Its hint reads "This will be reflected on the invoice.". Carton Size (Fixed or Not) Required, Yes or No. Starts at Yes. Yes means the product always ships in one particular carton. Carton Size A carton from the Carton list, shown as "name (size)". Required when the choice above is Yes. Note the label says size, but you are choosing a whole carton. Unit of Measurement Required. One of the active units from Unit of Measurement. HSN Code Required, digits only: "HSN code must contain only numbers.". HSN is the harmonised goods classification code used on tax paperwork. GST Percentage Required, a number above 0 up to 100. GST is the goods and services tax; this is the product's tax rate. Whether quantities of this product may have decimal places, and how many, comes from the chosen unit of measurement, not from the product itself. Errors you may see What happened Message Name left empty "Please enter product name." Name already used "Product name already exists." To the order name empty "Please enter to the order name." Fixed carton set Yes but no carton picked "Please selected a carton size." Picked carton has been switched off "The selected carton size is invalid or has been deactivated." No unit picked "Please select a unit of measurement." HSN code empty "Please enter HSN code." HSN code has letters "HSN code must contain only numbers." GST left empty "Please enter GST percentage value." GST zero or below "GST percentage must be greater than 0." GST above 100 "GST percentage must be less than or equal to 100." Adding a product Select "Add new product". Fill the fields above and select Save ("Reset" clears the form, "Cancel" returns to the list). On success: "Product has been created successfully!". The product is active immediately and can be picked on orders straight away. Changing a product Edit opens the same form; Update saves it, showing "Product has been updated successfully!". The status is switched from the list, not the edit screen. See the caution under "What happens behind the scenes" before correcting a name. Removing a product The dialog asks "Are you sure you want to delete this Product?" with "You won't be able to revert this!" and the button "Yes, delete it!". Removal is refused while the product appears on any purchase order, invoice or packing list. That includes orders since revised or removed. The message reads "This record cannot be deleted as it is associated with existing records in the system!". The message does not say which use is blocking. Switching a product off asks "Are you sure you want to deactive this Product?" ("…active…" when switching on) with "Yes, change it!". Switching off is refused in three cases: an order that is not finished, an invoice still in progress, or a packing list still in draft. The message reads "This record cannot be deactivated as it is currently in use by other active records in the system!". Switching back on is never refused. Exporting the list "Export" offers "Excel", "Excel All", "CSV", "CSV All", "PDF", "PDF All". The plain versions take the rows on the current screen. The "All" versions cover every matching product across all pages. If the search box is filled in, only the products matching it. Clear the search first to export everything. Exports also include the To the Order Name, HSN Code and Status, which the screen keeps hidden. What happens behind the scenes The product's details are copied onto each order when the order is created: name, to-the-order name, HSN code, unit and decimal rules, and from there onto invoices and packing. Renaming a product, or changing its HSN or unit, changes nothing on paperwork already raised. Only orders created afterwards pick up the new details. The GST percentage feeds the tax worked out on invoices for this product. A fixed carton is a head start, not a rule: when packing, picking this product fills its carton in automatically, and the packer can still change it. Switching a product off only stops it being picked on new work; everything already saved keeps working. FAQs Why can everyone see products, even from other companies? A product belongs to no company, even though the menu places Product under "Company Data". Unlike customers and companies, everyone sees one shared list. I renamed a product. Why does existing paperwork still show the old name? The product's details are copied onto each order when the order is created, and from there onto invoices and packing. Renaming a product, or changing its HSN or unit, changes nothing on paperwork already raised; only orders created afterwards pick up the new details. Does a fixed carton force the packer to use that carton? No. A fixed carton is a head start, not a rule: when packing, picking the product fills its carton in automatically, and the packer can still change it. Why is deleting a product refused, and what is blocking it? Removal is refused while the product appears on any purchase order, invoice or packing list, including orders since revised or removed. The message does not say which use is blocking. Where do I set how many decimal places a product's quantity may have? Not on the product. Whether quantities may have decimal places, and how many, comes from the chosen unit of measurement. The Carton Size field asks for a size, so why am I choosing a carton? The label says size, but you are choosing a whole carton from the Carton list, shown as "name (size)". It is required when the fixed-carton choice is Yes. Related pages Uploading products from a spreadsheet: adding many at once Carton: the box types a fixed carton points at Unit of Measurement: where decimal rules come from Creating a purchase order: where products are picked Last verified: 31 July 2026 Uploading products from a spreadsheet TL;DR This page covers adding many products at once from a spreadsheet, and reviewing past uploads. Rows that cannot be read are skipped rather than stopping the file, so always check the upload history afterwards to see what did not go in. What this is for Adding many products at once from a spreadsheet file, instead of typing them one at a time. Each file row becomes one product; rows that fail are skipped, logged with the reason, and the rest carry on. Before you start The upload is not in the main menu. It lives on the Product list: the Upload button opens the "Upload Product" window, and Upload History opens the log of past uploads. Both appear only for readers allowed to use them. The file must be a CSV, a plain comma-separated file, not an Excel workbook. Excel can save as CSV. Any carton sizes and units of measurement the file mentions must already exist and be active, so set those up first. Uploading the file On the Product list, select Upload. The "Upload Product" window opens with two parts: "Select File" and "Download Demo File". Select Download Template to fetch the sample file. Its heading row, exactly: Product Name,To The Order Name,Is Fixed Carton YesNo,Carton Size,Unit of Measurement,HSN Code, GST Percentage Fill one row per product: Column What it must contain Product Name Required, up to 255 characters, not already used by another product To The Order Name Required, up to 255 characters Is Fixed Carton YesNo Exactly "Yes" or "No" Carton Size Required when the previous column is "Yes". Must match an existing carton's size text exactly: the size, not the carton's name Unit of Measurement The unit's exact text, and that unit must be active HSN Code Digits only GST Percentage A number above 0, up to 100 Choose the file under "Select File" and select Submit ("Reset" clears the choice, "Cancel" closes the window). The result comes back as one message. Quoted exactly as the system writes them: all rows good: "12 Products has been uploaded successfully" a mixture: "12 Products has been uploaded successfully & 3 Products has been failed to upload." all rows bad: "All 3 Products has been failed to upload " There is no limit in the upload itself on row count or file size. The only rule the screen enforces is the CSV type. Very large files are limited only by what the server accepts. When a row cannot be read The row is skipped and every other row still processes. Nothing stops mid-file. The skipped row is written to the upload history with the status Failed. A "Reason" column lists everything wrong with it. Several problems appear together, separated by commas, using the same messages as the product form. For example: "Please enter product name., HSN code must contain only numbers.". A row that names a carton size or unit that does not exist fails with "The selected carton size is invalid." or "The selected unit of measurement is invalid.". Errors you may see What happened Message Submit with no file chosen "Please select a file to upload." File is not a CSV "Failed Uploading File! File Type must be CSV." A row's name is already taken "Product name already exists." (in that row's Reason) A row's carton size matches nothing "The selected carton size is invalid." A row's unit matches nothing active "The selected unit of measurement is invalid." The upload itself fails "Something went wrong. Please try again later." Reviewing past uploads Upload History (from the Product list) opens a screen headed "Upload History", with one row for every spreadsheet row ever uploaded, successful or failed, not one per file. Columns: ID, File Name, Product Name, Fixed Carton, Carton Size, Unit of Measurement, GST Percentage, Status, Reason, and a view action showing the row in full. Failed rows carry their reasons; successful rows show a dash there. Search by file name to see one upload's rows together. What happens behind the scenes Every file row is written to the history first, then the good ones become products. The history is the complete list, including what never made it in. Products created this way behave exactly like hand-entered ones, including the copy-at-order-creation behaviour described on the Product page. The file's rows are checked with the same rules as the product form; nothing extra is forgiven or enforced. FAQs Why can't I find the upload in the main menu? It is not there. The upload lives on the Product list: the Upload button opens the "Upload Product" window, and Upload History opens the log of past uploads. Both appear only for readers allowed to use them. Can I upload my Excel workbook directly? No. The file must be a CSV, a plain comma-separated file, not an Excel workbook. Excel can save as CSV. Some rows did not go in. How do I find out which ones and why? Open Upload History from the Product list. Skipped rows appear there with the status Failed, and a Reason column lists everything wrong with each one, using the same messages as the product form. Will one bad row stop the whole file? No. The bad row is skipped and every other row still processes; nothing stops mid-file. The skipped row is logged in the upload history with the reason. Why does the Carton Size column keep failing even though the carton exists? The column must match an existing carton's size text exactly: the size, not the carton's name. A row that matches nothing fails with "The selected carton size is invalid.". Is there a limit on how many rows I can upload? There is no limit in the upload itself on row count or file size; the only rule the screen enforces is the CSV type. Very large files are limited only by what the server accepts. Related pages Product: the fields these columns fill Carton: where the size texts must already exist Unit of Measurement: where the unit texts must already exist Last verified: 31 July 2026 Customer TL;DR This page covers customers: who they are, their currency, their registrations, and where goods are delivered. The customer's currency decides the currency of every order raised for them. Everything here is copied onto each order and invoice as it is created, so corrections never reach documents already produced. What this is for A customer is who you sell to: their name, address, currency, tax registrations, and the delivery places goods can be sent to. Every purchase order and invoice names one customer, and copies these details the moment it is created. Customers belong to one company, and you see only the customers of companies assigned to you. Where to find it Menu: Company Data → Customer. The list screen Columns: ID, Customer Name, Company, GSTIN, Allowed Extra Quantity (a Yes or No badge), Status, and an actions column. Long names shorten with a hover after 20 characters. The search box (placeholder "Search") settles about a second after typing stops; ten rows show at a time with All, 10, 25, 50, 100 and 500 on the selector. "Add new customer" appears only for readers allowed to add. Fields A customer form has many fields. They fall into five groups. Who they are. The identity printed on paperwork: Field Rules Company Required. The company this customer buys from. Customer Name Required, unique ("Customer name already exists."), up to 255 characters. To the Order Name Required, up to 255 characters. The alternative wording used on "to the order" paperwork; its hint reads "This will be reflected on the invoice.". Customer Address Required. Where they are: Field Rules Country Required. State Required once a GSTIN is entered: "Please select a state." State Code Fills in from the state. Money and ordering: Field Rules Currency Required. This decides the currency of every order for this customer. Orders in any other currency cannot be billed to them. Allowed Extra Quantity Required, Yes or No. Whether shipments may exceed what was ordered. See below. Registrations. Each is explained once: Field Rules GSTIN Optional; when given, exactly 15 characters, unique, and in the official shape: "Please enter a valid GSTIN.". GSTIN is the Indian goods-and-services-tax registration number. EORI Number Optional, up to 255 characters. EORI is the customs registration number used for trade with the European Union. Dispatch locations. These are added as repeating rows, for goods delivered somewhere other than the customer's own address. Each row: Dispatch Name, Dispatch To the Name, Dispatch Country, Dispatch Address, Dispatch To the Address, all required within a row; the two addresses allow up to 5,000 characters. Orders and invoices offer these locations as the delivery place. The over-ordering setting Allowed Extra Quantity decides whether an invoice may dispatch more of an item than the order asked for. No: dispatching beyond what remains is refused: "Exceeds available qty (12.000)." (your number will differ). Yes: no ceiling is applied. The setting is copied onto each order when the order is created, and the order's copy is what counts at invoicing time. Changing the customer's setting affects only orders created afterwards. An existing order keeps the answer it was born with, and a revision of that order inherits the old answer too. Errors you may see What happened Message No company picked "Please select a company." Name empty / taken "Please enter customer name." / "Customer name already exists." To the order name empty "Please enter to the order name." Address empty "Please enter customer address." GSTIN wrong shape "Please enter a valid GSTIN." GSTIN wrong length "GSTIN must be at least 15 characters." / "GSTIN must be less than or equal to 15 characters." GSTIN already used "GSTIN already exists." GSTIN given, no state "Please select a state." No country / currency "Please select a country." / "Please select a currency." No extra-quantity answer "Please select if extra quantity is allowed." A dispatch row incomplete "Please enter dispatch name." / "Please enter dispatch to the name." / "Please select a dispatch country." / "Please enter dispatch address." / "Please enter dispatch to the address." Adding, changing, removing Adding ends with "Customer has been created successfully!"; changing with "Customer has been updated successfully!". The status is switched from the list. Removing asks "Are you sure you want to delete this Customer?" with "You won't be able to revert this!" and "Yes, delete it!". It is refused while any order, invoice, or packing list names the customer: "This record cannot be deleted as it is associated with existing records in the system!". Removal also removes the customer's dispatch locations. Switching off asks "Are you sure you want to deactive this Customer?" with "Yes, change it!". It is refused in three cases: an order neither finished nor removed, an invoice still in progress, or a packing list in draft. The message reads "This record cannot be deactivated as it is currently in use by other active records in the system!". Exporting the list The usual six choices under "Export". The plain versions take the rows on screen; the "All" versions cover every matching customer across all pages. With text in the search box, only the matches. Exports also carry the To the Order Name, address, EORI number and status, which the screen keeps hidden. What happens behind the scenes Everything above is copied onto each order and invoice at the moment it is created: name, to-the-order name, address, GSTIN, EORI, country, state, currency, the extra-quantity answer, and the chosen dispatch location. Corrections made here afterwards never reach documents already produced, and revising an existing order does not refresh them either. A revision copies from the order it replaces. When an existing order carries wrong customer details, the only way to paperwork with the corrected details is a new order (or invoice) created after the correction. Plan corrections before raising orders, not after. FAQs Why can't I bill an order to this customer in a different currency? The customer's currency decides the currency of every order for them. Orders in any other currency cannot be billed to them. I corrected a customer's address. Why does the invoice still show the old one? Customer details are copied onto each order and invoice at the moment it is created, so corrections never reach documents already produced. The only way to paperwork with the corrected details is a new order or invoice created after the correction. Why was my dispatch refused with "Exceeds available qty"? The order's copy of the Allowed Extra Quantity setting is No, so dispatching beyond what remains on the order is refused. When the setting is Yes, no ceiling is applied. I changed Allowed Extra Quantity to Yes. Why does an existing order still refuse extra quantity? The setting is copied onto each order when the order is created, and the order's copy is what counts at invoicing time. An existing order keeps the answer it was born with, and a revision of that order inherits the old answer too; only orders created afterwards pick up the change. Why can't I see a customer I know exists? Customers belong to one company, and you see only the customers of companies assigned to you. Why is the State field suddenly required? State becomes required once a GSTIN is entered, with the message "Please select a state." The State Code then fills in from the state. Related pages Company: the other side of every order Creating a purchase order: where these details are copied first Changing a purchase order: why a revision keeps old customer details Last verified: 31 July 2026 Company TL;DR This page covers the company you sell as: its identity, addresses, bank details, registrations, and the settings that change how documents look. Around fifty of these values are copied onto every order and invoice at the moment it is created. Correcting one here never reaches paperwork already raised. What this is for A company is the business you sell as, the name at the top of every document. It holds your identity, addresses, bank account, trade registrations, and the settings that shape invoices and their paperwork. It is the largest form in the system, split into six tabs; the groups below follow them. Companies are limited by assignment: you see only the companies assigned to you. Where to find it Menu: Company Data → Company. The list screen Columns: ID, Logo, Company Name, Email, Primary Phone Number, GSTIN, IGST, Status, and actions. Search (placeholder "Search", about a second's delay), ten rows with the usual selector, and "Add new company" for readers allowed to add. Company Profile Field Rules Company Name Required, unique ("Company name already exists."), up to 255 characters. Contact Person Name Required, up to 255 characters. GSTIN Required, exactly 15 characters, unique, official shape. GSTIN is the Indian goods-and-services-tax registration number. PAN Number Required, exactly 10 characters, unique, official shape. PAN is the Indian income-tax account number. Currency Required. The company's own accounting currency, printed alongside customer-currency amounts on paperwork. Export With Payment of IGST Required, Yes or No. The tax treatment of exports. See "Settings that change documents". Website Optional, up to 255 characters. Company Logo Required (jpeg, png or jpg, up to 2MB: "The logo size must not exceed 2MB."). Printed in the letterhead block at the top of documents. Contact & Address Primary Email (required), Secondary Email, Primary Phone Number (required, 10-15 digits, unique), Secondary Phone Number (same shape, optional), Country and State (required), State Code (fills from the state), District, Address (required). The emails, phones and website appear in the letterhead; the address appears wherever the company block prints. Bank Details Bank Name, Account Holder Name, Account Number (digits only, unique), IFSC Code (letters and numbers; the Indian bank-branch code), Branch, Bank Address, all required. These print in the bank block of invoice paperwork, so a buyer knows where to pay. Export Details Each is a trade registration, printed on export paperwork where required: Field What it is IEC Code Required, unique. India's importer-exporter code. AEO Certificate No. Optional, unique. Authorised Economic Operator certificate, a customs trust status. REX Number Optional, unique. The EU's Registered Exporter number, used for preferential origin. EORI Number Optional, unique. The customs registration number for trade with the European Union. CIN Number Optional, exactly 21 characters in the official shape: "Invalid CIN format.". India's corporate identity number. Invoice Settings Field Rules Invoice Number Type Required: "Prefix" or "Postfix". Invoice Number Pattern Required, up to 255 characters. PDF Margin Required, a whole number from 1 to 300. Starts at 150. Its hint reads "Set top margin for invoice PDFs in pixels.". Additional Percentage Required, above 0 up to 100. Starts at 18. The tax rate applied to an invoice's additional charges. The type and pattern build final invoice numbers: the pattern sits before the sequence number (Prefix) or after it (Postfix). The number is assigned when an invoice is completed. The Invoices pages will cover the numbering itself. Declarations At least one declaration is required ("At least one declaration must be added."), each up to 5,000 characters. A declaration is the official statement printed on the invoice; invoices pick one of the company's declarations when they are created. Settings that change documents Three settings change what paperwork looks like or says: PDF Margin: blank space left at the top of a document printed without the letterhead, for pre-printed stationery. With the letterhead on, a small fixed margin is used and this setting is ignored. It is read at printing time: changing it changes the next print of any invoice, old or new. Export With Payment of IGST: for exports abroad, Yes applies IGST (India's integrated goods-and-services tax) to the invoice; No applies no tax to the export. It also changes the tax summary the tax paperwork prints. Frozen onto each invoice at creation. Changing it here leaves existing invoices as they were. Additional Percentage: the tax rate for additional charges, also frozen onto each invoice at creation. Errors you may see The form checks every field with a message in the same style throughout. The ones worth knowing ahead of time: What happened Message GSTIN / PAN / phone / account number / IEC already used "GSTIN already exists." / "PAN number already exists." / "Primary phone number already exists." / "Account number already exists." / "IEC code already exists." PAN wrong shape "Please enter a valid PAN number." Logo missing / wrong type / too big "Please select company logo." / "Only jpeg, png, and jpg formats are allowed." / "The logo size must not exceed 2MB." PDF margin with decimals "PDF margin must be between 1 to 300. Decimal values are not allowed." No declaration "At least one declaration must be added." Adding, changing, removing Adding ends with "Company has been created successfully!"; changing with "Company has been updated successfully!". The status is switched from the list. Removing asks "Are you sure you want to delete this Company?" with "You won't be able to revert this!" and "Yes, delete it!". It is refused while any customer, order, or invoice belongs to the company: "This record cannot be deleted as it is associated with existing records in the system!". Switching off asks "Are you sure you want to deactive this Company?" with "Yes, change it!". It is refused while the company has any order neither finished nor removed, any invoice in progress, or any customer at all, active or not. The message says "…currently in use by other active records…", but an inactive customer blocks the switch too. Exporting the list The usual six choices under "Export". Plain versions take the rows on screen; "All" versions cover every matching company across all pages. With text in the search box, only the matches. What happens behind the scenes Around fifty company values are copied onto every order and invoice at the moment it is created. They include the name, logo, addresses, emails and phones. They also include GSTIN, PAN, the full bank block, IEC, AEO, REX, EORI, CIN, currency, and the margin and tax settings. Later corrections never reach paperwork already raised, and a revision of an order copies the old values forward rather than refreshing them. The one exception is the PDF Margin, which documents read live at printing time, as above. Removing or switching off a company changes nothing on existing orders and invoices. They carry their own copies. FAQs I corrected the company's details. Why does old paperwork still show the old values? Around fifty company values are copied onto every order and invoice at the moment it is created, and later corrections never reach paperwork already raised. A revision of an order copies the old values forward rather than refreshing them. Why did changing the PDF Margin affect invoices that already existed? PDF Margin is the one setting documents read live at printing time, so changing it changes the next print of any invoice, old or new. The other document settings are frozen onto each invoice at creation. Why is the PDF Margin ignored on some prints? The margin applies only to documents printed without the letterhead, for pre-printed stationery. With the letterhead on, a small fixed margin is used and this setting is ignored. Why can't I switch a company off even though its orders and invoices are finished? Switching off is refused while the company has any customer at all, active or not. The message says "currently in use by other active records", but an inactive customer blocks the switch too. Why can't I delete a company? Removal is refused while any customer, order, or invoice belongs to the company. When does an invoice get its final number? The number is assigned when an invoice is completed. The Invoice Number Type and Pattern build it: the pattern sits before the sequence number (Prefix) or after it (Postfix). Related pages Customer: the other party on every order Creating a purchase order: where the copy is first taken How access works: company assignment, and why lists differ between users Last verified: 31 July 2026